vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 1 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power mini smd led description the new miniled series has been designed in a small white smt package. the feature of the device is the very small package 2.3 mm x 1.3 mm x 1.4 mm. the miniled is an obvious solution for small-scal e, high-power products that are expected to work reliably in an arduous environment. this is often the case in automotive and industrial application. product group and package data ? product group: led ? product series: power ? package: smd miniled ? angle of half intensity: 60 features ? utilizing latest adva nced alingap technology ? available in 8 mm tape ? luminous intensity and color categorized per packing unit ? luminous intensity ratio per packing unit i vmax. /i vmin. 1.6 ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? preconditioning according to jedec ? level 2a ? ir reflow soldering ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? traffic signals and signs ? interior and exterior lighting ? dashboard illumination ? indicator and backlighting purposes for audio, video, lcds switches, symbols, illuminated advertising etc. note (1) driving the led in reverse direction is suitable for a short term application only 19226 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. vlms234v2ba-gs08 super red 900 1400 2240 50 626 630 639 50 1.9 2.2 2.8 50 alingap on si VLMR234ABCA-GS08 red 1400 2000 3550 50 619 625 631 50 1.9 2.2 2.8 50 alingap on si vlmk234abca-gs08 amber 1400 2500 3550 50 611 616 622 50 1.9 2.25 2.8 50 alingap on si vlmy234abca-gs08 yellow 1400 2000 3550 50 583 589 594 50 1.9 2.3 2.8 50 alingap on si absolute maximum ratings (t amb = 25 c, unless otherwise specified) vlms234.., vlmr234.., vlmk234.., vlmy234.. parameter test condition symbol value unit reverse voltage (1) short term application only v r 5v dc forward current t amb 60 c i f 70 ma power di ssipation p v 200 mw junction temperature t j 125 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c thermal resistance junction-to-ambient m ounted on pc board (pad size > 16 mm 2 )r thja 325 k/w
vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 2 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlms234.., super red parameter test condition p art symbol min. typ. max. unit luminous intensity i f = 50 ma vlms234v2ba i v 900 1400 2240 mcd luminous flux/luminous intensity v /i v -3-mlm/mcd dominant wavelength i f = 50 ma d 626 630 639 nm peak wavelength i f = 50 ma p - 639 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -18- nm angle of half intensity i f = 50 ma ? - 60- deg forward voltage i f = 50 ma v f 1.9 2.2 2.8 v reverse current v r = 5 v i r -0.0110 a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmr234.., red parameter test condition p art symbol min. typ. max. unit luminous intensity i f = 50 ma vlmr234abca i v 1400 2000 3550 mcd luminous flux/luminous intensity v /i v -3-mlm/mcd dominant wavelength i f = 50 ma d 619 625 631 nm peak wavelength i f = 50 ma p - 632 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -18- nm angle of half intensity i f = 50 ma ? - 60- deg forward voltage i f = 50 ma v f 1.9 2.2 2.8 v reverse current v r = 5 v i r -0.0110 a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmk234.., amber parameter test condition p art symbol min. typ. max. unit luminous intensity i f = 50 ma vlmk234abca i v 1400 2500 3550 mcd luminous flux/luminous intensity v /i v -3-mlm/mcd dominant wavelength i f = 50 ma d 611 616 622 nm peak wavelength i f = 50 ma p - 622 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -18- nm angle of half intensity i f = 50 ma ? - 60- deg forward voltage i f = 50 ma v f 1.9 2.25 2.8 v reverse current v r = 5 v i r -0.0110 a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy234.., yellow parameter test condition p art symbol min. typ. max. unit luminous intensity i f = 50 ma vlmy234abca i v 1400 2000 3550 mcd luminous flux/luminous intensity v /i v -3-mlm/mcd dominant wavelength i f = 50 ma d 583 589 594 nm peak wavelength i f = 50 ma p - 591 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? 17 nm angle of half intensity i f = 50 ma ? 60 deg forward voltage i f = 50 ma v f 1.9 2.3 2.8 v reverse current v r = 5 v i r 0.01 10 a
vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 3 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? wavelengths are tested at a current pulse duration of 25 ms. note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped on any one reel. in order to ensure availability, single wavelength groups will not be orderable typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - maximum permissible forward current vs. ambient temperature fig. 2 - relative luminous in tensity vs. angular displacement color classification group dominant wavelength (nm) amber yellow min. max. min. max. 1 611 618 - - 2 614 622 583 586 3 - - 585 588 4 - - 587 590 5 - - 589 592 6 - - 591 594 luminous intensity classification group luminous intensity (mcd) standard min. max. v2 900 1120 aa 1120 1400 ab 1400 1800 ba 1800 2240 bb 2400 2800 ca 2800 3550 crossing table vishay osram vlms234v2ba ls m67f-s2u2-1 vlmy234abca ly m67f-t2v2-36 0 10 20 30 40 50 60 70 80 0 20 40 80 100 120 i f - max. permissible forward current (ma) t amb - ambient temperature (c) 60 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement
vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 4 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - forward current vs. pulse length fig. 4 - relative intensity vs. wavelength fig. 5 - forward current vs. forward voltage fig. 6 - relative luminous in tensity vs. forward current fig. 7 - change of forward voltage vs. ambient temperature fig. 8 - relative luminous inte nsity vs. ambient temperature 0.00 0.02 0.04 0.06 0.08 0.10 0.12 t p - pulse length (s) i f - forward current (a) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 t p /t = 0.005 0.05 0.5 17044 0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 660 680 i rel - relative inten s ity - wavelenght (nm) yellow amber red s uper red 1 10 100 1 1.5 2 2.5 3 3.5 i f - forward current (ma) v f - forward voltage (v) yellow s uper red amber red 0.001 0.1 1 10 110100 i v rel - relative luminou s inten s ity i f - forward current (ma) 0.01 yellow amber red s uper red - 300 - 200 - 100 0 100 200 300 - 40 - 20 0 20 40 60 80 100 v f - change of forward voltage (mv) t amb - ambient temperature (c) yellow amber red s uper red 0 0.5 1.0 1.5 2.0 2.5 - 40 - 20 0 20 40 60 80 100 i v rel - relative luminou s inten s ity t amb - ambient temperature (c) yellow s uper red amber red
vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 5 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - change of dominant wavelength vs. ambient temperature package dimensions in millimeters - 8 - 6 - 4 - 2 0 2 4 6 8 10 - 40 - 20 0 20 40 60 80 100 ? d - change dominant wavelength (nm) t amb - ambient temperature (c) s uper red red amber yellow drawing-no.: 6.541-5069.01-4 i ss ue: 2; 24.11.14 2.2 0.1 2.05 0.1 0.4 0.1 0.1 0.05 0.7 0.1 1.3 0.1 0.9 0.1 1.4 0.1 (1.2) cathode mark not indicated tolerance s 0.2 (1.5) (0.9) area not flat technical drawing s according to din s pecification s s older re s i s t cu.area > 5 mm 2 1 0.8 0.8 2.8 propo s ed pad layout (for reference only)
vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 6 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape dimensions in millimeters leader and trailer dimensions in millimeters gs08 = 3000 pcs cover tape peel strength according to din en 60286-3 0.1 n to 1.3 n 300 mm/min 10 mm/min 165 to 180 peel angle label standard bar code labels for finished goods the standard bar code labels are product labels and used for identification of goods. the finished goods are packed in final packing area. the standard packing units are labeled with standard bar code labels be fore transported as finished goods to warehouses. the labels are on each packing unit and contain vishay semicond uctor gmbh specific data. soldering profile fig. 10 - vishay lead (pb)-free reflow soldering profile (according to j-std-020) 42 1.5 1.75 3.5 8 41 package mark k a 1.58 7 max. 2.38 0.254 1.58 8 max. trailer leader no devices min. 200 min. 400 start end devices 96 11818 no devices 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a max. 2 cycles allowed 255 c
vlms234.., vlmr234.., vlmk234.., vlmy234.. www.vishay.com vishay semiconductors rev. 1.2, 07-mar-17 7 document number: 84215 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a. 2d barcode b. partno = vishay part number c. qty = quantity d. selcode = selection code (binning) e. ptc = code of manufacturing plant f. batch = date code: year / week / plant code g. region code h. sl = sales location i. terminations finishing k. lead (pb)-free symbol l. halogen-free symbol m. rohs symbol dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c / - 0 c and < 5 % rh (dry air/nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22 -a112 level 2a label is included on all dry bags. example of jesd22-a1 12 level 2a label esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electrostatic sensitive devices warning labels are on the packaging. vishay semiconductors standard bar code label the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. a b d c e f g h i m l k aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
